Komatsu — 11.9 CAR STEREO

11. EXPLANATION OF COMPONENTS 11.9.2 WHEN RECEIVING RADIO BROADCASTS 1. Turn ON the ignition key or turn it to the ACC position before turning on the system power switch. 2. Select either AM or FM band with the FM/AM selector switch. 3. Tune to the desired station using the presetting or manual tuner switches. 4. Adjust the volume, the balance between left and right speakers and the sound quality to your choice using the respective buttons. 5. When turning off the radio, turn the VOL knob counter-clockwise until a click is heard.

REMARK l When changing over to radio while listening to a cassette tape, press the EJECT button to stop the tape and the system will automatically change over to radio. l Simply insert a tape to change over to cassette tape mode while listening to the radio. Automatic tuning with SEEK button Pressing the “SEEK” button shifts the receiving frequency in the higher frequency direction before automatically stopping at a posi- tion where a station is picked up. Manual tuning Pressing either the A or v-shaped “TUNER” buttons shifts the receiving frequency in the steps given below. Pressing either of these buttons continuously, allows continuous shifting of the receiv- ing frequency.

Areas AM FM North, Central or South America 10 KHz 0.1 MHz Other areas 9 KHz 0.025 MHz Automatic selection between monaural and stereo receiving modes When the FM stereo broadcasting waves currently being received are too weak for normal receiving (such as receiving a long distance from the broadcasting station or in mountain areas) the system automatically shifts from stereo to monaural mode to suppress disturbing noise. It automatically returns to stereo mode when the intensity of the radio wave being received recovers. 2-26