11. EXPLANATION OF COMPONENTS Presetting to selected stations When listening to a preset station, select either of the AM, FMI, FM2, FM3 bands using the FM/AM select switch, then simply press the number key corresponding to the preset selected station. The system can memorize 6 stations in AM band and 18 stations in FM bands (FMI: 6 stations, FM2: 6 stations and FM3: 6 stations). Presetting procedures: 1. If the system is playing a cassette tape, press the eject button to stop the tape. 2. Tune to the desired station for presetting: First, select either of the MW(AM), FMI, FM2 or FM3 bands before tuning to the frequency of the desired station using the TUNING buttons. Press the MEMO switch.
3. 4. While “MEMO” is flashing, press the preset key of the channel number into which you want to memorize the preset station. (The preset channel and frequency will be indicated. This con- cludes presetting.) 5. Repeat the above procedure Steps 2 to 4 to preset to other desired stations. REMARK l To change the station in a preset key number, repeat above procedure Steps 2 to 4, as well. l If the main power supply is interrupted, such as when exchang- ing machine battery, all presettings will be erased. Repeat the presetting procedure in such case.
Auto memory When the “A.MEMO” button is pressed, the system tunes itself to stations receivable in the area where the machine is currently located, one after another, and memorizes the frequencies in its preset-memory, all automatically. Memory backup battery When pressing a preset key fails to tune into the programmed station, repeat the presetting procedure after operating the vehicle for a day. if, however, the memory is still defective the next day, the service life of the backup battery is likely over, unless an imperfect contact or wire breakage is found. In this case, replace with a new backup battery. 2-27