INSTRUMENTS AND CONTROLS 1 - HOUR METER This instrument indicates the total number of operating hours of the engine. The count is continuous and the number is increased by 1 when the engine has run for one hour, independently of its speed. The hour meter keeps functioning even if the machine is not trav- elling or working. The reading is to be considered valid for the calculation of the maintenance intervals. RWA07100 2 - ENGINE COOLANT TEMPERATURE INDICA- TOR It indicates the temperature of the engine coolant, which must normally be 80-85°C (176-185°F). After the start, it is necessary to let the engine warm up before be- ginning work.
If during operation the indicator exceeds the limit values and en- ters the overheating sector (red), let the engine idle until the indi- cator returns to the normal temperature sector (green). When the indicator is in the overheating sector (red), the acoustic alarm sounds, too. If this inconvenience occurs again, try to locate the fault (see 3.15.5.3 TROUBLE-SHOOTING - ENGINE). RWA07140 3 - FUEL LEVEL INDICATORT It indicates the fuel level in the tank; this information is available only when the ignition key is in position « I » (see pos. 9).
RWA07110 4 - ENGINE OIL PRESSURE WARNING LIGHT This warning light comes on and makes the acoustic alarm sound with engine at rest when the ignition circuit is operated, then goes out as soon as the engine lubrication circuit is pressurized. If this warning light remains on or comes on when the engine is running, stop the machine immediately and try to locate the trou- ble. RWA07130 70