Komatsu — 3.3.1 INSTRUMENT, WARNING LIGHTS AND PUSH BUTTONS

INSTRUMENTS AND CONTROLS 6 - PRE-HEATING WARNING LIGHT This warning light comes on when the ignition key is turned to po- sition « » to start the engine at low temperatures (see “3.6.2.2 STARTING WITH COLD ENGINE OR IN COLD CLIMATES”). RWA07160 7 - FAN SWITCH (with cab only) This is a two-speed switch that operates the fan motor. If operated after the opening of the tap installed in the engine compartment, it ensures the circulation of warm air and serves as heating switch. (See “3.5.4 VENTILATION AND HEATING”). RWA07170 8 - WORKING LIGHT AND INSTRUMENT LIGHT SWITCH This is a rotary switch with three positions marked by the following symbols: (OFF - 1 - 2).

1 ) Enables the instrument light circuit 2 ) Enables the working light circuit RWA07180 71 This warning light comes on and makes the acoustic alarm sound when the ignition circuit is energized and goes out when the en- gine exceeds the idling speed; if this warning light remains on even when the engine is running at the normal operating speed, this means that the alternator does not work and the battery is not charged correctly. RWA07150 RWA07150 IMPORTANT • If the warning light remains off when the ignition key is turned to position «I», this means that the alternator is faulty or broken.