. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL MAIN FILTER CARTRIDGE (POOR FUEL ARRANGEMENT SPECIFICATION) Carry out this operation after carrying out the maintenance in the "REPLACE FUEL PRE-FILTER CARTRIDGE (PAGE 4-62)" for every 500 hours. WARNING 4 - 67 After the engine has been operated, all par ts are at high temperature, so do not replace the filter im mediately.
Wai t for al l parts to cool down bef ore starting the operation High pressure is generated inside the eng ine fuel pipin g system when When replacing the filter, wait for at least 30 seconds a fter stopping t he engine to let the intern al pressure go down before replacing the filt Do not bring any NOTICE Genuine Komats u fuel filter cartridges us e a special fil ter that has hig hly efficient filtering abili ty. When replacing th e filter cartridge, always use a genuine Komatsu part. The common rail fuel injection system us ed on this ma chine co nsists of more precise parts tha n the conventional inj ection pump and nozzle .
If any part other t han a genuine Komatsu f ilter cartridge is used, dust or dirt may get in and caus e problems with the inj ection system. Always avoid using substitute pa rts. When carrying o ut inspection or maintena nce of the fue l system , pay m ore attention than norma l to the entry of dirt. If dirt is stuck to any part , use fuel to wash it off co mpletely. NOTICE Do not move the bla de when the front cover a nd engine sid e cover on the l eft side of the machine ar e open. The blad e will hit the covers and there is danger that the covers m ay be broken. Prepare a cont ainer to catch the fuel. Prepare a filter wrench 1. Open the fue machine.
l tank inspection cover on the right side of the 2. Set fuel suppl y valve (1) to the CLO SED positio n (direction of arrow).