Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE on remove it. of a turn. 4 - 68 3. Open engine sid e cover on the left side o f machine. 4. Set the containe r to catch the fuel under t he filter cartridg e (2). 5. Using a filter wr ench, turn filter cartridge (2) counterclockwise 6. Remove the fro nt cover at the front of the machine. 7. Set the containe r to catch the fuel under t he filter cartridg e (3). 8. Using a filter wr ench, turn filter cartridge (3) counterclockwise to remove it. NOTICE Do not fill the new f Remove cap (B) an 9. Clean the filter h older, coat the packing su rface o f the new filter cartridge thinly w holder.

ith oil, then install the filte r cartridge t o the filter 10. When installing, tighten until the packing surface contacts the sea l surface of the filter holder, then tighten i t 3/4 dge is tightened too far, t he packing will b e damaged and this will lead to leakage of fuel. I f the too loose, fuel will also l eak fro m th e packing , so always tighten the REMARK Step 9 and 10 shou ld be carried out for each filter c 11. Open fuel suppl 12. After replacing f ilter cartridges (2) and (3 ), bleed the air fr om t he f uel circuit as follows 13. Fill the fuel tank with fuel (to the position where the f loat i s at t he