. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE, ADJUST WARNING 4. Check for leakage from fuel line. Check that there is no leakage of fuel or damage to the hoses and tubes. If any problem is found, carry out repairs. to the hoses and tubes. If any problem is found, repair the oil 3 - 88 WALK-AROUND CHECK Before starting the engine, check the area aro und and under the machine, check for loose nuts and b olts , damage t o any parts, leakage of oil, fuel, or coolant, an d check the condition of the work equipment and hydraulic systems. Check for looseness or play in electric wiring a nd check that there is no dust accumulated around high-temperature parts.
Remove any flammable materials from around the b attery, engine, muffler, turbocharger, or other high temperatur e engine p arts. Leakage of fuel or oil will cause the machine to catch fire. Check carefully, be sure to repair any problem, or contac t you r Komatsu distributor. If the machine is at an angle, reposition it leve Perform the following inspections and cleanin 1. Check for damage, wear, play in work equ ipment, cylinders, linkage and hoses. Check that there are no cracks, excessive wear, or play in the work equipment, cylinders, linkag e or hose s. If any abnormality is found, repair it. 2. Remove dirt and dust from around engine , battery and radiator.
Check if there is any dirt or dust accumulat ed around the engine or radiator. Also check if there is a ny fl ammable material (dead leaves, twigs, etc.) accumu lated around the battery or high temperature engine p arts , suc h as the engine muffler or turbocharger. Remo ve all such dirt or flammable material. 3. Check for coolant or oil leakage around th e engine. Check that there is no oil leakage from the engine or coolant leakage from the cooling system. I f any problem is found, repair it. 5. Check for oil leakage from HST piping, tra Check that there is no oil leakage. If any 6. Check for oil leakage from the brake line.
Check that there is no oil leakage or dam leakage and repair or replace the damage 7. Check for damaged or worn tires, wheels, and wheel hub bolts and nuts, check for loose wheel hub bolts and nuts. Check for cracks or peeling of the tires a nd for cracks or wear to the wheels (side rim, rim base, lock ring). . If any abnormality is found, repair or replace the part. caps. Tighten any loose wheel hub bolts or nuts . If any abnormality is found, repair or replace the par If any valve caps are missing, install new