Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION WARNING appears to be no abnormality with the seat belt, replace it 3 - 89 8. Check for damage and loose bolts on the handrail and s teps. Repair any damage and tighte n any loose bolts. 9. Check for damage to gauges, lamps on the instrument p anel and l oose bo Check for damage to the pane l, gauges and lamps. If any problem i s found, replace the parts. Clean off a ny dir n the surface. Tighten any lo 10. Check for loose air cleaner m Check for the loose bolts. If lo 11. Check for loose battery termin als. T T T k ighte n any loose terminal. ightening torque for portion A : 5.9 to 9.8 Nm (0.6 to 1.0 kgm) ightening torque for portion B:

11.8 to 19.6 Nm (1.2 to 2.0 gm) gm) 12. Check for damage to the seat belt and mounting clamps Even if ther once every REMARK The date o f manufacture of the sea t belt is marked on the belt at the plac e indicated by the arrow in the diagram on the right. Che ck that there are no loose bolts on the equipment mountin g the seat belt to the machine, and tight Tightening torque: 24.5 ± 4.9 Nm (2.5 ± 0.5 kgm, 18.1 ± 3.6 If the belt i s damaged or fluff is st arting to form, or if there i s any damage or deformation of the seat belt holders, replace the sea belt. belt. 13. Clean cab window. Clean the cab window to ensu re good visibility when operating the machin