Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION ADJUST SEAT BELT WARNING ADJUST LEVER STAND FREE 3 - 102 Always w ear the seat b Before fastening the sea t belt, check th at there is no ab normality in the belt-mounting bracket or mou nting of the belt. If the belt or damaged, rep Fasten the seat belt bef ore starting op erations Always wear the seat be lt during operations. Make s ure that the left a nd right belts are not t wisted when fastening the FASTENING AND REMOVIN G BELT Fastening seat belt Hold grip (2) and pull the belt out from wind-in devic e (1), check that the belt is not twisted, then insert tongue (3) into buckle (4) .

ing this, pull the belt lightly to check that it is properly buckle securely When do locked. Removing belt Press bu tton (5) in buck le (4), and re move t ongue (3) from buckle (4). The belt is automatically wound in, s o hold grip (2) and return the belt slow ly to wind-in de vice (1). ADJUST HEIGHT OF WRIS T REST Loosen l ock lever (2) an d adjust the height of wrist rest (1) Amount of adjustment: 60 mm (2.4 in ) REMARK tton (3) pressed and operate lock lever (2) to the Keep bu the position. The lever can be turned in the desired di rection.