Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE WHEN REQUIRED CLEAN, REPLACE AIR CLEANER ELEMENT WARNING the engine and damage it. 2. Open the engine side cover on the right side of the chassis. 3. Remove four clips (2), then remove cover (3). of the air cleaner body, cover (3) and 4 - 17 If inspection , cleani Always stop the eng ine befor e carrying out th ese operations. Whe n using compressed air, there is danger t hat dirt may be blown around and cause serious in Always use protecti ve glasse s, dust mask, an d other protecti ve equipment. CLEANING OUTER ELEMENT 1. 1.

When the yellow piston o f the dust indic ator (1) enter s the red range (7.5 kPa) or the air cleaner clogging caution lamp of the machine monitor lights up, clean the element. For inspection method, see "CHECK AIR CLEANER (PAGE 3-95)". NOTICE Never r emove i nner ele ment (5). If it is removed, dust will enter a nd cause engine trouble. 4. Remove outer el ement ( 5. Clean evacuator valve