. OPERATION EXPLANATION OF COMPONENTS CHARACTER DISPLAY PORTION (1) (2) (3) Service meter Engine speed or travel speed Action code display (4) (5) Failure code display Filter, oil replacement time display Normally, the service meter is displayed on the character display. If the machine has failed, if there has been an excessive load on the machine, or if inspection and maintenance are necessary, an action code is displayed to recommend suitable action. When the time for replacing the filter or changing the oil is reached, the filter or oil to be replaced is displayed.
NOTICE Information regarding the failure of the machine or maintenance is displayed on the character display when the starting switch is at the ON position. Check the display to confirm that there is no abnormality before starting to travel. SERVICE METER The top line of this display portion (1) shows the total time that the machine has been running. The service meter advances while the engine is running, even if the machine is not moving. The meter advances by 1 for every hour of operation, regardless of the engine speed.
Even if the starting switch is at the OFF position, the service meter, engine speed, or machine travel speed will be displayed if top part ( U ) of machine monitor mode selector switch 1 is kept pressed. NOTICE When the starting switch is at the OFF position, if the service meter, engine speed, or travel speed is being displayed even thought the top part ( U ) of machine monitor mode selector switch 1 is not being pressed, there is probably a failure in the equipment, so please ask your Komatsu distributor to carry out inspection. 3 - 7