12.16.3 INSPECTION AND REPAIR Frequent inspection and prompt repair will reduce repair costs. The following items for inspection will serve as a guide to maintenance service of each undercarriage part. Perform periodical inspection and contact the Komatsu distributor in your area when machine has approached repairable limits and reversing limits. MEASURING HEIGHT OF GROUSER After taking up slack in track shoes, measure height at center of shoe as shown below. D85A, E Standard height (h): 72 mm (2.8 in) Repair limits : 25 mm (1.0 in) AE105710 D85P Standard height (h): 123 mm (4.8 in) Repair limits : 101 mm (4.0 in) AE111300 MEASURING OUTSIDE DIAMETER OF TRACK ROLLER 1.
Measure height (size C) of link tread as shown. 2. Stop machine at position where link tread, whose size C has been measured completely, contacts roller tread. Then measure size B. 3. Calculate outside diameter of tread (size A): A=(B-C)x2 D85A, E Standard size (A): 222 mm (8.7 in) Repair limits : 198 mm (7.8 in) D85P Standard size (A): 222 mm (8.7 in) Repair limits : 198 mm (7.8 in) AE111310 2-66