Komatsu — 12.16 TIPS FOR LONGER UNDERCARRIAGE LIFE

12.16.2 INSPECTION AND ADJUSTMENT l Properly adjust track tension. Tension should be measured at clearance @ shown in the diagram - usually 20 to 30 mm (0.8 to 1.2 in) at this point. For rocky terrain, tighten tracks slightly. In clay or sandy areas, slightly loosen them. (For inspection and adjustment proce- dures, refer to “24.2 WHEN REQUIRED”). l Check idler rollers for oil leakage as well as for loose bolts and nuts. If any trouble is detected, repair immediately. AE111270 l Check the clearance between the idler guide plate and the track frame. If clearance @ increases, idler may develop side motion and tracks may come off.

(For inspection and adjustment proce- dures, refer to “24.2 WHEN REQUIRED”.) AE111280 2-65