Komatsu — 24.6 EVERY 1000 HOURS SERVICE

24. SERVICE PROCEDURE 24.6.4 CHANGE OIL IN FINAL DRIVE CASE Ak WARNING The oil is at high temperature immediately after the machine has been operated. Wait for the oil to cool down before starting the operation. Prepare the following. Container to catch drained oil: Min. 51 e capacity Refill capacity: 0 0 D85A, E : (each) 41 .4? (10.82 US gal, 9.02 UK gal) D85P : (each) 51 b? (13.46 US gal, 11.22 UK gal) 1. Set an oil container under drain plug @ to catch the oil. 2. Remove drain plug 8, drain the oil, then tighten drain plug @ again. 3. Add engine oil to the specified level through plug 0. For details of the oil to use, see “20.

USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. 4. Check that the oil is at the specified level. For details, see “24.4 EVERY 250 HOURS SERVICE”. 3-53