Komatsu — 11.4 CONTROL LEVERS, PEDALS

11. EXPLANATION OF COMPONENTS 11.4 CONTROL LEVERS, PEDALS 1. FUEL CONTROL LEVER This lever is used to control the engine speed and output. It is also used to stop the engine. 0 Engine stop position: Push the lever forward fully. @ Low idling position: Pull the lever from engine stop position @ until you feel the operating force falls 0 @ High idling position: Pull the lever fully from low idling posi- tion Off. I AE104690 2. GEAR SHIFT LEVER This lever changes the transmission gear range. Three-speed forward and three-speed reverse travel can easily be selected by simply shifting the gear shift lever to any desired speed position.

Place the gear shift lever in the neutral position before starting the engine. 3. STEERING LEVER This lever is use to steer the machine. If the lever is moved partially in the direction of turn, the machine, the steering clutch is disengaged and the machine turns gradually. If the lever is moved more, the steering brake is applied and the machine will turn on the spot. 2-17