11. EXPLANATION OF COMPONENTS 4. BRAKE PEDAL g WARNING Do not place your foot on this pedal unnecessarily. Depress the pedal to apply the right and left brakes. If the steering lever is pulled out half-way and the brake pedal on the same side as the lever is depressed at the same time, the machine will make a pivot turn. 5. DECELERATION PEDAL sudden loss of load. Slow the machine by depressing the This pedal is used to decelerate engine speed. To quickly restore normal engine power during ripper operation, this pedal is designed to be operated in two stages. Normally, the pedal is used at the first stage (800 to 850 rpm).
When required, the pedal can be further depressed so the engine runs at low idling speed. 6. BRAKE LOCK LEVER I g WARNING When the machine is parked, lock brake pedals without fail. This device is used to lock the brake pedal when parking. When the pedals are depressed and the lock lever is placed in LOCK, the brake is locked. To release brakes, depress the brake pedals and set the lever in FREE. AE110300 2-18