11. EXPLANATION OF COMPONENTS 7. SAFETY LEVER (FOR GEAR SHIFT LEVER) g WARNING When leaving the operator’s compartment, set the safety lever securely to the LOCK position. If the gear shift lever is not locked, and it is touched by mistake, this may lead to a serious accident. When the machine is stopped for a while, be sure to set the gear shift lever in neutral and set the safety lever to LOCK. If the safety lever is not placed securely in the LOCK position, the control lever may not be properly locked. Free a 0 a Lock I I AE110310 This is the locking device of the gear shift lever. Set the gear shift lever in neutral and set the safety lever to LOCK. 8.
SAFETY LEVER (FOR BLADE CONTROL LEVER) a WARNING When leaving the operator’s compartment, set the safety lever securely to the LOCK position. If the blade control and ripper control levers are not locked and are touched by accident, it may lead to serious injury or damage. If the safety lever is not set securely to the LOCK position, the lock may not be applied. Check that it is in the position shown in the diagram. When parking the machine or when carrying out mainte- nance, always lower the blade to the ground, then set the safety lever to the LOCK position. AE110320 This safety lever is a device to lock the blade control levers. 2-19