12. OPERATION 12.10 WORK POSSIBLE USING BULLDOZER In addition to the following, it is possible to further increase the range of applications by using various attachments. 12.10.1 DOZING A bulldozer digs and transports dirt in a forward direction. Slope excavation can always be most effectively carried out by proceeding from the top downward. When dozing toward one side only, operate with angled blade (angledozer only). AE111140 12.10.2 SMOOTHING NOTICE Avoid smoothing on rocky blade. or stony ground.
It can damage the AE111150 To finish the ground to a flat surface after digging or leveling, put a full load of soil in front of the blade and operate the blade up and down in small movements while traveling forward. Finally, place the blade at FLOAT and travel at low speed in reverse while pulling the blade over the ground surface. When doing this, to prevent damage to the blade, be careful not to travel over any stones or rocks. 12.10.3 CUlTlNG INTO HARD OR FROZEN GROUND OR DITCHING For digging and ditch excavation of hard or frozen ground, tilt the blade. Even hard ground can be dug effectively by a tilted or angled blade.
If the ground is harder, use a ripper attachment for better efficiency. 2-58