12. OPERATION 12.9.5 PRECAUTIONS ON SLOPES Be careful of fuel level If the fuel level in the fuel tank becomes low when working on slopes, the engine may suck in air because of the angle of the machine or the swaying of the machine. If this makes the engine stop, so be careful not to let the fuel level in the fuel tank become too low. Be careful of oil level When operating machine on sloped areas of more than 20”, fill every place with oil to H level. Precautions when engine stops on slopes If the engine stops when working on traveling on a slope, depress the brake pedal immediately, lower the work equipment, and stop the machine. Then pull the brake lock lever to lock the brake pedal.
Next, return the gear shift lever to neutral, lock it in position, then start the engine again. Precautions when stopping temporarily on slopes When stopping the machine temporarily on slope, depress the brake pedal, stop the machine, then lock the brake pedal securely with the brake lock lever. Never operate the fuel control lever or decelerator pedal to stop the machine on slopes. 2-57