OPERATION Meter Display 1. Engine pre-heating monitor 7. One touch power up monitor 2. Swing lock monitor 8. Engine coolant temperature gauge 3. Wiper monitor 9. Fuel gauge 4. Auto-deceleration monitor 10. Hydraulic oil temperature gauge 5. Working mode monitor 11. Service meter 6. Travel speed monitor Pilot Displays When the ignition switch is ON, the pilot display lights up when the display items are functioning. Engine Pre-heating Monitor This monitor lamp (1) indicates the pre-heating time required when starting the engine at an ambient temperature below 0°C (32°F).
The monitor lamp lights when the ignition switch is turned to the HEAT position and flashes after about 30 seconds to show that the pre-heating is completed. (The monitor lamp will go off after about ten seconds.) PC350LL-7E0 2-17