OPERATION Swing Lock Monitor This monitor (2) informs the operator that the swing lock is being actuated. Actuated: Lights up When the swing lock switch is turned ON (ACTUATED), the monitor lamp lights up. This monitor flashes when the swing holding brake cancel switch is turned on. Remark The swing motor is equipped with a disc brake that mechanically stops the rotation. When the swing lock monitor lamp is lit up, the brake remains applied. Wiper Monitor This monitor (3) indicates the operating status of the wiper. The monitor display (when the wiper switch is operated) is as follows. When ON lights up : Wiper moves continuously When INT lights up : Wiper moves intermittently OFF :
Wiper stops Auto-deceleration Monitor This monitor (4) shows if the auto-deceleration function is being actuated. The monitor display when the auto-deceleration switch is operated is as follows. Auto-deceleration monitor ON : Auto-deceleration actuated Auto-deceleration monitor OFF : Auto-deceleration canceled Working Mode Monitor This monitor (5) displays the set working mode. The monitor display when the working mode switch is operated is as follows. P : P mode (for heavy-load operations) E : E mode (for operations with emphasis on fuel economy) L : L mode (for fine-control operations) B : B mode (for breaker operations) 2-18 PC350LL-7E0