Kubota L3240, L3540, L3940, L4240, L4740, L5040, L5240, L5740 — Adjusting Brake Pedal

PERIODIC SERVICE 92 B Adjusting Clutch Pedal B Adjusting Brake Pedal To avoid personal injury: A Stop the engine and chock the wheels before checking brake pedal. C Adjusting procedure 1. Stop the engine and remove the key. 2. Slightly depress the clutch pedal and measure free travel at top of pedal stroke. 3. If adjustment is needed, loosen the lock nut, remove the cleves pin and adjust the rod length within acceptable limits. 4. Retighten the lock nut and split the cotter pin. C Adjusting procedure 1. Release the parking brake. 2. Slightly depress the brake pedals and measure free travel at the top of pedal stroke. 3.

If adjustment is needed, loosen the lock nut and turn the turnbuckle to adjust the rod length within acceptable limits. 4. Retighten the lock nut. (1) Clutch rod (2) Nut (3) Clevis pin (A) "FREE TRAVEL" (1) Lock nut (2) Turnbuckle (A) "FREE TRAVEL" Proper clutch pedal free travel 20 to 30 mm (0.8 to 1.2 in.) on the pedal Proper brake pedal free travel 15 to 20 mm (0.6 to 0.8 in.) on the pedal Keep the free travel in the right and left brake pedals equal.