OPERATING THE TRACTOR 40 B Cruise Control Lever 9. Depress the Speed Control Pedal. B Speed Control Pedal To avoid personal injury: A Pull the cruise control lever completely to the rear before starting the engine. A Do not use the cruise control when driving on the road. A Be sure to connect both the left and the right brakes when driving on the road. The speed cruise control won't be released with single brake activation. To avoid personal injury: A Do not operate if tractor moves on level ground with foot off of Speed Control Pedal. A Consult your local KUBOTA Dealer. Forward Pedal Depress the speed control pedal with the toe of your right foot to move forward.
Reverse Pedal Depress the speed control pedal with the heel or toe of your right foot to move backward. Cruise control is designed for tractor operating efficiency and operator comfort, This device will provide a constant forward operating speed by holding the cruise control lever at the selected position. C To engage Cruise Control Device 1. The proper forward speed will be maintained if you apply the cruise control lever at any position. 2. To operate faster than the set speed, depress the speed control pedal further down in this condition. The set speed will be resumed if you release the pedal.
C To disengage Cruise Control Device A Move the lever all the way back and then to "NEUTRAL" position to release the cruise control. A Depress both brake pedals. A Depress the speed control pedal in reverse. (1) Speed control Pedal (2) Stopper bolt (A) "FORWARD" (B) "REVERSE" A Cruise control will be disengaged automatically when both brake pedals are depressed. A The cruise control device does not disengage when the individual right or left brake is applied. A Cruise control device will not operate in reverse. A To prevent serious damage to the HST, do not adjust the stopper bolts.
A When you stand up from the seat with the speed control pedal stepped on or the cruise control lever engaged (ON), the engine will stop regardless of whether the tractor is moving or not. This is because the tractor is equipped with Operator Presence Control system (OPC).