Kubota L3240, L3540, L3940, L4240, L4740, L5040, L5240, L5740 — ATA (Auto Throttle Advance) Lever

41 OPERATING THE TRACTOR A When the brake pedal or the reverse pedal has been depressed to release the cruise control, move the cruise control lever by hand back to the "NEUTRAL (OFF)" position. B ATA (Auto Throttle Advance) Lever Get this lever engaged (ON), and the tractor speed and the engine rpm can be controlled with the speed control pedal. It helps pull a trailer or the like more easily. Before moving the lever, be sure to return the speed control pedal to "NEUTRAL" position.

HST GST MT (1) Cruise control lever (A) "INCREASE" (B) "DECREASE" (C) "NEUTRAL" (1) ATA lever (2) Speed control pedal (A) "ENGAGE" (ON) (B) "DISENGAGE" (OFF) A When you stand up from the seat with the speed control pedal stepped on or the cruise control lever engaged (ON), the engine will stop regardless of whether the tractor is moving or not. This is because the tractor is equipped with Operator Presence Control system (OPC). C IntelliPanel(TM) Message 1. The cruise control indicator stays on while the tractor is running under cruise control. 2. Step on the speed control pedal until the tractor goes beyond the cruise speed. Now the indicator starts flashing. 3.

It goes out when the cruise control is released with setting the cruise control lever to "NEUTRAL (OFF)" or depressing the brake pedal or reverse pedal. (1) Cruise control indicator