OPERATING THE TRACTOR 42 6. Selecting the Travel Speed. [GST Type] (1) Shuttle shift lever (2) Main gear shift lever (3) Front wheel drive lever (4) Creep gear shift lever (if equipped) (A) "FORWARD" (B) "REVERSE" (N) "NEUTRAL POSITION" B Shuttle Shift Lever A When you stand up from the seat with the shuttle lever at "FORWARD" or "BACKWARD", the engine will stop regardless of whether the tractor is moving or not. This is because the tractor is equipped with Operator Presence Control system (OPC). To avoid personal injury: BEFORE DISMOUNTING TRACTOR: A ALWAYS SET PARKING BRAKE Leaving transmission in gear with the engine stopped will not prevent tractor with GST transmission from rolling.
A STOP THE ENGINE AND REMOVE THE KEY Raise up and shift the shuttle shift lever forward to obtain forward speeds and shift it backward to obtain reverse speeds without using the clutch pedal. A Reduce engine speed to low idle before shifting the shuttle shift lever. A Shuttle shift change should not be done all at one time. Move the shuttle shift lever to the neutral position momentarily before you accomplish the shuttle change, hard or sudden gear shift may cause transmission damage.