Kubota L3240, L3540, L3940, L4240, L4740, L5040, L5240, L5740 — Main Gear Shift Lever

43 OPERATING THE TRACTOR B Main Gear Shift Lever A There is no problem with a delay in starting. The tractor will start as the oil temperature increases. HST GST MT A Two speed steps are assigned to each of the backward speed labels 3 thru 6. While using the main gear shift lever in this range for backward movement, however, each label gives just one speed, not two. To avoid personal injury: A Use the clutch when making an emergency stop or working in confined areas, such as getting tractor in position to attach an implement. A An accident may occur with erratic shifting operation. For safe operation, move main gear shift lever only one gear at a time.

A Shift the main gear shift lever firmly and without hesitation. Improper shift lever position will cause the tractor to momentarily coast on slopes. A Avoid changing gears when climbing or descending a slope. A Before ascending or descending a slope, shift to a gear low enough to control tractor speed without using brakes. If you shift gears while ascending or descending a slope, be prepared to use the brakes to maintain control. A Operate in reverse at slow speeds to maintain control. C IntelliPanel(TM) Message The main gear shift number being selected appears on the display.

By combination of using the main gear shift lever and the shuttle shift lever, 12 forward speeds and 8 reverse speeds are obtained. With the Glide Shift Transmission, you can shift at any time, stopped or on-the-go. The Shuttle Shift lever must be in forward or reverse. There is no need to use the clutch when starting out or shifting up or down. Before dismounting tractor, shift the main gear shift lever and the shuttle lever to the neutral position and set parking brake. A Start in lower gears and shift one gear at a time until desired gear is obtained. A To prolong clutch life, avoid slipping the hydraulic clutch. Pay attention to the following points:

A Select proper gear and engine speed depending on the type of job. A Avoid lugging the engine, especially in higher gears. If RPM's drop excessively, shift to a lower gear. A In cold climate, it may take longer for the tractor to move after the main shift lever is moved. This is because the transmission oil must warm up. A Warm up the tractor sufficiently. If there is not enough time to do so, start the tractor with the shuttle shift lever or the clutch. (1) Gear shift number (1 thru 12) N: "NEUTRAL"