Kubota L3240, L3540, L3940, L4240, L4740, L5040, L5240, L5740 — Control Lever and Hydraulic Hose Connections

67 HYDRAULIC UNIT DUAL REMOTE HYDRAULIC CONTROL SYSTEM The tractor is equipped with the double-acting 2-segment hydraulic control valve for front loader. To apply the hydraulic power take-off for general attachments, keep the following point in mind. To avoid damage of the attachments: A Do not connect attachments through the hydraulic motor to the [C] and [D] ports. If the control lever is moved to the Regeneration position (R1), the seals on the hydraulic motor will be damaged. A This control valve is provided with the Regeneration position.

When the [C] and [D] ports are used to take off hydraulic power for the hydraulic cylinder, be sure to connect the [C] port to the "Head-End" side port of the hydraulic cylinder. A Make the following connections when using this valve to take off hydraulic power for the hydraulic cylinder. B Control Lever and Hydraulic Hose Connections Connect the control lever in its specified direction and the hydraulic hoses to their specified ports. C Rear Hydraulic Outlet (if equipped) With the optional kit in place, oil from the loader valve can be taken out of the back of the tractor.

(1) Loader / Remote control valve lever (R) "RIGHT" (L) "LEFT" (U) "UP" (D) "DOWN" Pressure Returning Hydraulic outlet ports of first segment (1) Rear Hydraulic Outlet A With this optional kit in place, oil cannot be taken for the front loader. A If the optional remote hydraulic control valve is already in place, this kit cannot be additionally installed. Hydraulic outlet ports of second segment Colored Coupler Hydraulic Cylinder port [B: Yellow], [C: Blue] Head-End side [A: White], [D: Red] Rod-End side Lever UP DOWN Port [A] In Out [B] Out In Lever RIGHT LEFT Port [C] In Out [D] Out In