Kubota L3240, L3540, L3940, L4240, L4740, L5040, L5240, L5740 — Valve Lock

HYDRAULIC UNIT 68 B Loader / Remote Control Valve Lever 1. Before moving the lever, make sure that the hydraulic hoses for attachments are connected. 2. Move the lever diagonally (a, b, c shown in the figure), and the first and second segments can be controlled at once. B Valve Lock To avoid injury from crushing: A Do not utilize the valve lock for tractor maintenance or repair. A The valve lock is to prevent accidental actuation when implement is not in use or during transport. The control valve is equipped with a valve lock feature. The control valve is locked in the neutral position. The lock is not intended and will not prevent a leak down of the implement during the period of storage.

A Move the lever to the "FLOAT" position, and it will be held there by the detent mechanism. To use the valve as a floating valve with detents, connect the hydraulic hoses to ports [A] and [B]. A When taking off hydraulic power from port [D], the flow rate can be adjusted in two stages with the lever. The flow rate is high at position (R1) and low at position (R2). Move the lever to position (R1) or (R2) depending on the attachment in use. (1) Lock lever (A) "Lock" (B) "Unlock"