Perkins — Perkins 402F-05, 403F-07, 403F-11, 403F-15 Industrial Engines Operation and Maintenance Manual

SEBU9064 43 Refill Capacities Fluid Recommendations Cleaning the System of Heavy-Duty Antifreeze Perkins cooling system cleaners are designed to clean the cooling system of harmful scale and corrosion. Perkins cooling system cleaners dissolve mineral scale, corrosion products, light oil contamination, and sludge. Clean the cooling system after used coolant is drained or before the cooling system is filled with new coolant. Clean the cooling system whenever the coolant is contaminated or whenever the coolant is foaming. Illustration 21 g03383033 Typical API symbol i05341026 Fluid Recommendations Terminology Certain abbreviations follow the nomenclature of SAE J754.

Some classifications follow SAE J183 abbreviations, and some classifications follow the EMA Recommended Guideline on Diesel Engine Oil. In addition to Perkins definitions, there are other definitions that will be of assistance in purchasing lubricants. Recommended oil viscosities can be found in this publication, “Fluid Recommendations/ Engine Oil” topic (Maintenance Section). General Lubricant Information Because of government regulations regarding the certification of exhaust emissions from the engine, the lubricant recommendations must be followed. API American Petroleum Institute SAE Society Of Automotive Engineers Inc. Engine Oil ACEA Association des Constructers European Automobiles .

Commercial Oils ECF Engine Crankcase Fluid NOTICE Perkins require the use of the following specifica- tion of engine oil. Failure to use the appropriate specification of engine oil will reduce the life of your engine. Licensing The Engine Oil Licensing and Certification System by the American Petroleum Institute (API) and the Association des Constructers European Automobilesand (ACRA) is recognized by Perkins . For detailed information about this system, see the latest edition of the API publication No. 1509. Engine oils that bear the API symbol are authorized by API.

Table 24 Classifications for the 400F Industrial Engines Oil Specification CJ-4 ACEA E9 ECF-3 API CJ-4 and ACEA E9 oil categories have the following chemical limits: 0.1 percent maximum sulfated ash 0.12 percent maximum phosphorous 0. 4 percent maximum sulfur The chemical limits were developed in order to maintain the expected life of the engine.