52 SEBU9064 Maintenance Recommendations Severe Service Application i04150276 Severe Service Application Severe service is the application of an engine that exceeds the current published standards for that engine. Perkins maintains standards for the following engine parameters: Performance such as power range, speed range, and fuel consumption Fuel quality Operational Altitude Maintenance intervals Oil selection and maintenance Coolant type and maintenance Environmental qualities Installation The temperature of the fluid in the engine Illustration 23 g01075639 Use the example above. The current flow from the welder to the ground clamp of the welder will not damage any associated components.
Refer to the standards for the engine or consult your Perkins dealer or your Perkins distributor in order to determine if the engine is operating within the defined parameters. Severe service operation can accelerate component wear. Engines that operate under severe conditions may need more frequent maintenance intervals in order to ensure maximum reliability and retention of full service life.
(1) Engine (2) Welding electrode (3) Keyswitch in the OFF position (4) Battery disconnect switch in the open position (5) Disconnected battery cables (6) Battery (7) Electrical/Electronic component (8) Minimum distance between the component that is being welded and any electrical/electronic component (9) The component that is being welded (10) Current path of the welder (11) Ground clamp for the welder Due to individual applications, it is not possible to identify all of the factors which can contribute to severe service operation. Consult your Perkins dealer or your Perkins distributor for the unique maintenance that is necessary for the engine.
The operating environment, incorrect operating procedures, and incorrect maintenance procedures can be factors which contribute to a severe service application. 5. When possible, connect the ground clamp for the welding equipment directly to the engine component that will be welded. Place the clamp as close as possible to the weld. Close positioning reduces the risk of welding current damage to the engine bearings, to the electrical components, and to other components. Environmental Factors Ambient temperatures – The engine may be exposed to extended operation in cold environments or hot environments.
Valve components can be damaged by carbon buildup if the engine is frequently started and stopped in cold temperatures. Hot intake air reduces engine performance. 6. Protect the wiring harnesses from welding debris and/or from welding spatter. 7. Use standard welding procedures to weld the materials together. Quality of the air – The engine may be exposed to extended operation in an environment that is dirty or dusty, unless the equipment is cleaned regularly. Mud, dirt, and dust can encase components. Maintenance can be difficult. The buildup can contain corrosive chemicals.