Perkins — Perkins 402F-05, 403F-07, 403F-11, 403F-15 Industrial Engines Operation and Maintenance Manual

56 SEBU9064 Maintenance Recommendations Alternator and Fan Belts - Replace 2. Move the alternator in order to increase or decrease the belt tension. 3. Tighten adjusting bolt (1) and tighten mounting bolts and nut (2). Tighten bolt (3). Tighten all fixing to a torque of 25 N·m (221 lb in) i05341723 Alternator and Fan Belts - Replace For applications that require multiple drive belts, replace the belts in matched sets. Replacing only one belt of a matched set will cause the new belt to carry more load because the older belt is stretched. The additional load on the new belt could cause the new belt to break. Note:

When new belts are installed, check the belt tension again after 20 hours of engine operation. Illustration 28 g03383666 Typical example Removal and Installation Procedure 1. Loosen adjusting bolt (1) and mounting bolt and nut (2). Loosen bolt (3). Refer to the original equipment manufacture for removal and installation of the fan guards. 2. Push the alternator (4) towards the engine. Note: If the belt is to be reused, mark the belt in order to show direction of rotation. Illustration 27 g03383665 Typical example Illustration 29 g03383667 Typical example 3. Remove the belt (5).