SEBU9064 77 Maintenance Recommendations Fuel System Secondary Filter - Replace 6. Fasten the assembly to the fuel filter base with setscrew (2). The fuel system will need to be primed after the new filter is installed. Refer to this Operation and Maintenance Manual, “Fuel System - Prime”. Fuel Filter with Element 1. Close the fuel supply valve (1). Illustration 50 g01334893 Typical example 2. Clean the outside of the fuel filter assembly. Illustration 51 g01334895 Typical example 3. Loosen the locking ring (2). 4. Remove the casing (3) for the filter and the element. Ensure that any fluid is drained into a suitable container. Note: Do not fill the fuel filter with fuel.
The fuel will not be filtered and the fuel could be contaminated. Contaminated fuel can damage your fuel system. 5. Assemble the following items: seal (5), filter element (6) and casing (3). 6. Install the assembled items to the filter base (4). 7. Install the locking ring (2) to the filter head. Rotate the locking ring in order to lock the assembly. The fuel system will need to be primed after the new filter is installed. Refer to Operation and Maintenance Manual, “Fuel System - Prime”.