Komatsu — 20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE

MAINTENANCE 20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS Š ASTM D975 No. 1 Other equipment will be necessary, when operating the machine at temperatures below -20 E C (-4 E F),therefore consult your distributor for your needs. Note 1: For axle oil, use only the recommended oil as follows. SHELL: DONAX TT or TD CALTEX: RPM TRACTOR HYDRAULIC FLUID CHEVRON: TRACTOR HYDRAULIC FLUID TEXACO: TDH OIL MOBIL: MOBIL 424 It is permissible to substitute engine oil SAE 30 API classification CD for axle oil. Although an increased in brake noise may occur, the durability of the axle is not be affected.

3-9 О Reservoir Kind of fluid Ambient Temperature Capacity -22 -30 -4 -20 14 -10 32 0 50 10 68 20 86 30 104EF 40EC Specified Refill Engine oil pan Engine oil S AE 5 W-30 22 R 5.8 US gal 4.8 UK gal 19.5 R 5.1 US gal 4.3 UK gal SAE 10W-30 SAE 15W -40 Brake 1 R 0.26 US gal 0.22 UK gal 1 R 0.26 US gal 0.22 UK gal SAE 5 W Transmission case 28 R 7.4 US gal 6.6 UK gal 23.5 R 6.2 US gal 5.2 UK gal S AE 10 W Hydraulic system 80 R 21.1 US gal 17.6 UK gal 41 R 10.8 US gal 9.0 UK gal S AE 10 W Axle (front & rear) (each) Axle oil See Note 1 14 R 3.7 US gal 3.1 UK gal 14 R 3.7 US gal 3.1 UK gal Pins Grease - - N LGI N o. 2 Fuel tank Diesel fuel 170 R 44.9 US gal 37.4 UK gal - ASTM D975 No.

2 Cooling system Coolant See 20.3 Coolant specification on page 3-13 38.5R 10.1 US gal 8.5 UK gal 35 R 9.2 US gal 7.7 UK gal