Adjusting brake pedal Adjusting inching pedal [DPS] ;..-->.:--.;-~ 20 em (7-7/8 in.) -----~ (D) Adjustment after connection to steering valve 502742 II There is no need of adjusting stroke of this pedal after steering clutch adjustment has been made properly. To be adjusted is its free play. ---- 502743 502744 1. Reposition stopper bolt (1) so that inching pedal is 20 em (7-7/8 in.) as measured from dashboard wall. Adjust length of rod (11) to bring steering valve plunger (9) into contact with roller (10). 1. Reposition stopper bolt (1) so that pedal is 20 cm (7-7/8 in.) as measured from dashboard wall. . 2.
Adjust length of rod (3) so that lever (2) starts moving soon when pedal is depressed. II Do not push in plunger (9). 2. Adjust length of rod (2) so that free play of pedal is 0.5 to 1 em (3/16 to 3/8 in.). 3. Reposition stopper bolt (4) so that pedal stroke is 14.5 em (5-11/16 in.). II Make sure right and left brakes move simultaneously when you start depressing pedal.