Mitsubishi — Mitsubishi BD2G/BS3G Tractor Shovel Manual

Adjusting clutch pedal [DD] Adjusting clutch brake [DD] Adjusting transmission control lever [DPS] CD 20 em (7-7/8 in.) Free play 1.5 em (9/16 in.) 502746 1. Reposition stopper bolt (1) so that clutch pedal is 20 cm (7-7/8 in.) as measured from dashboard wall. • This brake should be capable of stopping a rotating universal joint in about 2.5 seconds when clutch pedal is depressed all the way with engine running at maximum speed_ 2. Adjust length of rod (2) so that free play of pedal is 1.5 cm (9/16 in.). 3. Reposition stopper bolt (3) so that pedal stroke is 16 cm (6-5/16 in.). 1. Adjust as-installed length of spring (1) to 4 cm (1-5/8 in.). 2.

Loosen lock nuts (2) (3), and run in adjusting bolt (4) until brake band (5) comes in full-face contact with drum (6). • Clearance (a) between guide (1) and lever (2) should be 0.5 to 2 mm (0.02 to 0.08 in.) in any position. Loosen lock nuts (3), and turn rods (4) (5) to adjust clearance (a). 3. Back off adjusting bolt (4) 2.5 to 3 rotations from that position to obtain correct clearance between band and drum. If it is difficult to obtain correct clearance, lever parts would be badly worn. In such a case, consult your Mitsubishi dealer.