4) 4) BRAKE SYSTEM BRAKE SYSTEM (1) (1) Control valve swing brake system Control valve swing brake system This is the brake system to stop the swing motion of the excavator during operation. In this system, the hydraulic circuit is throttled by the swing control valve, and the resistance created by this throttling works as a brake force to slow down the swing motion. Work Deceleration Stop A B A B A B MCV MCV MCV MCV A, B opened MCV A, B throttled MCV A, B closed 2-48(1) (2) (2) Mechanical swing parking brake system Mechanical swing parking brake system This is function as a parking brake only when all of the RCV lever (except travel pedal) are not operated.
Η Brake assembly Brake assembly Circumferential rotation of separate plate (16) is constrained by the groove located at housing (1). When housing is pressed down by brake spring (20) through friction plate (15), separate plate (16) and brake piston (17), friction force occurs there. Cylinder block (10) is constrained by this friction force and brake acts, while brake releases when hydraulic force exceeds spring force. 20 10 17 15 16 1 Groove 21092SM15 1 Housing 10 Cylinder block 15 Friction plate 16 Separate plate 17 Brake piston 20 Spring 2-66