6. BUCKET ROLL OUT OPERATION 45073HC14 When the RH control lever is placed right, the bucket spool in the main control valve is moved to the roll out position by the pilot oil pressure from the remote control valve. The oil from the front pump flows into the main control valve and then goes to the small chamber of bucket cylinder. At the same time the oil from the large chamber of bucket cylinder returns to the hydraulic oil tank through the bucket spool in the main control valve. When this happens the bucket roll out. The cavitation which will happen to the rod of the bucket cylinder is prevented by a make up valve, on other hand.
The excessive pressure is also prevented by an overload relief valve in the main control valve. 3-18