hyundai R510LC-7 — 4. SINGLE OPERATION

7. SWING OPERATION When the LH control lever is placed left or right, the swing spool in the main control valve is moved to the left or right swing position by the pilot oil pressure from the remote control valve. The oil from the rear pump flows into the main control valve and then goes to the swing motor. At the same time, the return oil from the swing motor returns to the hydraulic oil tank through the swing spool in the main control valve. When thin happens, the superstructure swings to the left or right. The swing parking brake, make up valve and the motor brake valve are provide in the swing motors.

The cavitation which will happen to the swing motor is also prevented by the make up valve in the swing motor itself. 45073HC15 3-19