hyundai R510LC-7 — 12. MONITORING SYSTEM

4. CLUSTER FUNCTION LCD main operation display 1) Default screen Time display RPM display Hydraulic oil temperature gauge Fuel level gauge Engine coolant temperature gauge Option screen Default screen 1 2 3 4 5 1607A3CD02A 2 4 Option screen 2 1 1 4 3 5 3 5 1607A3CD02B (1) Time display This displays the current time. Refer to the page 5-45 to set time for details. 1607A3CD02C (2) RPM display This displays the engine rpm. 1607A3CD02C (3) Hydraulic oil temperature gauge This gauge indicates the temperature of hydraulic oil in 12 step gauge. 12th step 1st step : Below 30 C(86 F) F) The gauge between 2nd and 10th steps illuminates when operating.

Keep idling engine at low speed until the gauge between 2nd and 10th steps illuminates, before operation of machine. When the gauge of 11th and 12th steps illuminates, reduce the load on the system. If the gauge stays in the 11th~12th steps, stop the machine and check the cause of the problem. 2nd~10th step : 30-105 11th~12th step : Above 105 C(86-221 C(221 F) 1st step 1607A3CD02D (4) Fuel level gauge 1st step This gauge indicates the amount of fuel in the fuel tank. Fill the fuel when the 1st step or fuel icon blinks in red.

If the gauge illuminates the 1st step or fuel icon blinks in red even though the machine is on the normal condition, check the electric device as that can be caused by the poor connection of electricity or sensor. 1607A3CD02E (5) Engine coolant temperature gauge 12th step This gauge indicates the temperature of coolant in 12 step gauge. 1st step : Below 30 C(86 F) 2nd~10th step : 30-105 C(86-221 F) 1st step F) The gauge between 2nd and 10th steps illuminates when operating. Keep idling engine at low speed until the gauge between 2nd and 10th steps illuminates, before operation of machine. When the gauge of 11th and 12th steps illuminates, turn OFF the engine, check the radiator and engine.

11th~12th step : Above 105 C(221 1607A3CD02F 5-28