hyundai R510LC-7 — 12. MONITORING SYSTEM

3) Warning of main operation screen (1) Warning display Engine coolant temperature - This lamp blinks and the buzzer sounds when the temperature of coolant is over the normal temperature 105 F) . Check the cooling system when the lamp blinks. C 221 - Fuel level - (18 U.S. gal). Fill the fuel immediately when the lamp blinks. This lamp blinks and the buzzer sounds when the level of fuel is below 68 - Hydraulic oil temperature - This warning lamp operates and the buzzer sounds when the temperature of hydraulic oil is over 105 F) . Check the hydraulic oil level when the lamp blinks. Check for debris between oil cooler and radiator.

C 221 - - All gauge - This lamp blinks and the buzzer sounds when the all gauge is abnormal. Check the each system when the lamp blinks. - Communication error - Communication problem between MCU controller and cluster makes the lamp blinks and the buzzer sounds. Check if any fuse for MCU burnt off. If not check the communication line between them. - Pop-up icon display (2) 5-29 No Switch Selected mode Display 1 Work mode switch General work mode Heavy duty work mode Breaker operation mode 2 Power mode switch High power work mode Standard power work mode No Switch Selected mode Display 3 Auto deceleration switch Light ON Light OFF 4 Travel speed control switch Low speed High speed