hyundai R510LC-7 — 1. OPERATIONAL PERFORMANCE TEST

5) TRAVEL DEVIATION (1) Measure the deviation by the tracks from a 20 m straight line. (2) Preparation Adjust the tension of both tracks to be equal. Provide a flat, solid test yard 20 m in length, with extra length of 3 to 5 m on both ends for machine acceleration and deceleration. Hold the bucket 0.3 to 0.5 m above the ground with the arm and bucket rolled in. Keep the hydraulic oil temperature at 50 0.3~0.5m 5 C. 290LC7MS01 (3) Measurement Measure the amount of mistracking at high and low travel speeds. Before beginning each test, select the following switch positions. Mode selector : H mode Start traveling the machine in the acceleration zone with the travel levers at full stroke.

Measure the distance between a straight 20 m line and the track made by the machine.(Dimension a) After measuring the tracking in forward travel, turn the upperstructure 180 3~5 m extra length a 20M 3~5 m extra length and measure that in reverse travel. Repeat steps 7-7(2) 210-7 three times and calculate the average values. and (4) Evaluation Mistrack should be within the following specifications. Unit : mm / 20 m 7-7 Model Standard Maximum allowable Remarks R510LC-7 200 below 250