2) INSTALL (1) Carry out installation in the reverse order to removal (2) Remove the suction strainer and clean it. (3) Replace the return filter with a new one. (4) Remove breather and clean it. (5) After adding oil to the hydraulic tank to the specified level. (6) Bleed the air from the hydraulic pump. Remove the air vent plug(2EA) Tighten plug lightly Start the engine, run at low idling, and check oil come out from plug. Tighten plug. (7) Start the engine, run at low idling(3~5 minutes) to circulate the oil through the system. (8) Confirmed the hydraulic oil level and check the hydraulic oil leaks or not. 8-8