(5) After removing cover(C, 629) subassemb- ly, take out outer spring(625), inner spring (626) and spring seat(C, 624) from compensating section. Then draw out adjusting ring(Q, 645), pilot spring(646) and spring seat(644) from pilot section. Adjusting ring(Q,645) can easily be drawn out with M4 bolt. REG03 (210-7) (6) Remove hexagon socket head screws (436, 438) and remove pilot cover(641). After removing pilot cover, take out set spring(655) from pilot section. REG04 (210-7) (7) Remove snap ring(814) and take out spring seat(653), return spring(654) and sleeve(651). Sleeve(651) is fitted with snap ring(836). When removing snap ring(814), return spring(654) may pop out.
Take care not to lose it. REG05 (210-7) (8) Remove locking ring(858) and take out fulcrum plug(614) and adjusting plug (615). Fulcrum plug(614) and adjusting plug (615) can easily be taken out with M6 bolt. REG06 (210-7) 8-25