hyundai R510LC-7 — 4. MAIN CONTROL VALVE

(3) Center bypass cut spool assy(24) Apply loctite to thread of spool, assemble spool end to spool. Be careful not to appling loctite too much. Assemble spool assy, spring seat, spring and tighten plug with O-ring. Tightening torque : 9.5 ~ 11.0 kgf m (68.6 ~ 79.7 lbf ft ) (4) Arm1 regeneration spool assy(20) Assemble backup rings and O-rings to sleeve respectively. Assemble piston to sleeve which seal is assemble, and insert spool into sleeve. Assemble spool assy, spring seat, spring and tighten plug with O-ring. Tightening torque : 9.5 ~ 11.0 kgf m (68.6 ~ 79.7 lbf ft ) 8-43