hyundai R510LC-7 — 5. SWING DEVICE

3) ASSEMBLY (1) Assemble roller bearing(5) inside the casing(1). 5 1 21078SR016 (2) Assemble the drive shaft(2) into the casing(1) and then install oil seal(6) and roller bearing(7). 7 6 2 1 21078SR017 (3) Install stop ring(10) and thrust plate 3(8) on top of drive shaft(2). 8 10 2 21078SR018 (4) Assembling carrier2(9) assembly. Install thrust washer(14) inside the carrier2 (9). Install bush2(23) inside the planet gear2 (15) and then assemble them to the carrier2(9). Assemble the pin2(16) to the carrier2(9) and then press the spring pin(17) by hammering. Punch 2 points of the spring pin(17) lip. Take care not to mistake the matching marks of each part. 17 9 16 15 23 21078SR019 8-63