(5) Assemble carrier2(9) assembly correctly to the drive shaft(2). 9 1 21078SR020 (6) Assemble sun gear2(18) and thrust washer(14) to the center of the carrier2(9) assembly. 18 14 9 21078SR021 (7) Assembling carrier1(19) assembly. Assemble the pin1(21) to the carrier1(19) and then press the spring pin(17) by hammering. Punch 2 points of the spring pin's(17) lip. Install side plate3(26) onto the center of carrier1(19). Install needle cage(22) into the planet gear1(24). Assemble side plate(20), planet gear1 (24), side plate2(39) and then stop ring (38) to the pin1(21). Take care not to mistake the matching marks of each part. 26 38 39 22 24 20 17 21 19 21078SR022 8-64