(8) Install sun gear1(27) onto the side plate3 (26). 27 26 19 21078SR023 (9) Assemble carrier1(19) assembly onto the carrier2(9) assembly. 19 21078SR024 (10) Apply loctite to the tapped holes of casing (1). (11) Tighten 3 M16 eye bolts to the ring gear(11) and lift up and then assemble it onto the casing(1). Don't fail to coincide the knock pin(12) holes. 11 1 21078SR025 (12) Hammer 4 knock pins(12) around the ring gear(11). (13) Assemble stop ring(28) to the drive shaft of the swing motor. 12 28 11 1 21078SR026 8-65