hyundai R510LC-7 — 5. SWING DEVICE

(14) Apply loctite to the tapped holes of the ring gear(11) and then mount swing motor onto the ring gear(11). Don't fail to coincide the gauge bar(33) hole. (15) Tighten socket bolts(31) around the swing motor assembly. 31 Tightening torque : 25 m (181 2.5 kgf 18 lbf ft ) 21078SR027 (16) Assemble plugs(29, 30), gauge bar(33) and gauge pipe(32). 33 32 30 1 29 30 21078SR028 (17) Turn the swing motor assembly upside down and assemble cover plate(34) by tightening the hexagon socket bolts(35). Install spacer(3) and pinion gear(13) to the drive shaft(2). Assemble lock plate(36) on the pinion gear(13).

Assemble 2 lock washers(25) on the lock plate(36) with their 2 hole coincided individually to the tapped holes of drive shaft(2). Tighten hexagon socket bolts(37) to the drive shaft(2) and then fold all the lock washer(25) corners over the hexagon bolts(37). 2 25 37 36 13 3 35 34 21078SR029 Tightening torque : 25 m (181 2.5 kgf 18 lbf ft ) (18) Inject oil into the reduction gear. 8-66