hyundai R510LC-7 — 6. TRAVEL DEVICE

Remove pivot (267, 2EA). (21) (22) Remove snap ring (236), and then hit front side end face of shaft (202) lightly with plastic hammer or so to remove from spindle (101). ц As remove snap ring (236), use snap ring plier. (23) Remove snap ring (237), then remove roller bearing (249). ц Use snap ring plier. (24) Remove oil seal (232) from spindle (101). ц Do not reuse the disassembling oil seal (232). As reassembly, use new oil seal. (-) Driver Hammer Spindle Oil Seal Remove the oil seal (232) by hammering f r o m t h e s p i n d l e ( 1 0 1 ) a t t h e circumference of the oil seal (232) using (-) driver. That is all of disassembling work.

The pins (41) force-fitted to the valve casing cannot be removed. 8-109 480H8TM45 480H8TM46 480H8TM47 480H8TM48