2) DISASSEMBLY 14 Before the disassembly, clean the turning joint. Remove bolts(14), washer(15) and cover(3). 15 3 (1) 21078DA10 (2) Remove shim(6) and O-ring(10). (3) Remove retainer ring(13), spacer(4) and shim(5). 45078DA11 (4) Place body(1) on a V-block and by using a wood buffer at the shaft end, hit out shaft(2) to about 1/2 from the body with a hammer. Take care not to damage the shaft(2) when remove body(1) or rest it sideway. Put a fitting mark on body(1) and shaft(2). Wooden block Secure with hand V block Work bench 8-141(3) 210-7 Remove six slipper seals(7) and O- ring(9), from body(1). (5) 45078DA12 8-145